Shape Stacking Towers
PLEASE READ :
PREVIOUSLY WE USED SOFT BALSA WOOD DOWELS WHICH WE HAVE DECIDED TO DISCONTINUE AS WE HAD ONE CUSTOMER POINT OUT THAT IT WAS PERHAPS A LITTLE TOO FRAGILE AND SO PLEASE CONTACT US IF YOU HAVE ALREADY RECEIVED THIS ITEM WITH BALSA DOWELS AND WOULD LIKE US TO REPLACE THE DOWEL FOR THE NEW PINE ONES
Various Sets of Stacking Shapes in 18mm
Either 4 or 5 Shapes (5 in the assorted shape set)
On a base of the same Shape, and a 19mm thick BALSA wood Dowel to push and glue into the hole yourself if you wishWe have the dowels in a light PINE wood, they are smooth craft sticks approx 15cm long (Approx as I am handcutting these, so may vary by a few mm)
You will need to twist them into the base shape hole and they will hold stiff, and not fall out. You can always glue them into the holes too.
The Sets sizes range from approx (Average) 17cm (The base piece)
Then progressively smaller per piece with the top piece approx 5cm
The holes in the pieces are large enough that children are able to simply place them on the tower with no problems at all. They are lovely and roomy
We are working on other shape sets, but for now, we have an option for 'Other' - Select this please if you would like us to create another shape (Basic and Simple please (eg squares, not animals) )
The towers stand at approx 10cm tall
Shape Stacking Towers
Laser and CNC
As we now have a laser machine, we will be changing how some of our items are cut.
All items that are 4mm thick or have a 4mm part to them (Eg backings to trays and puzzles) will be laser cut, and we will also now cut a lot of our 6mm products with the laser machine too, as this gives a crisper finish to the edges.
Please use the comments box on the product you are buying if they are any of the above thicknesses, and feel you would prefer us to cut it as before with our CNC machines (This is not an option now with 4mm backings, as we will be pre cutting all of these to help with our speed of service)
thanks, the Perrys x
